# AER-TRN-01-P01 / Access and supported withdrawal

Concept draft 1.0

Fictional inert trainer only; source/training reviewer approval required before training use. No operational aircraft, OEM, qualification, licence-credit or release authority.



1. Confirm the training article

Read AER-TRN-01 and BAY-01; compare with the assigned lesson.

Evidence: The article and source identify the same inert trainer.

Hold/limit: A different or unreadable article ID means HOLD.



2. Freeze the lesson revision

Use TRN-LRU-01 v2 teaching-cue concept; retain A permitted and B excluded.

Evidence: The revision and allowed-unit list are recorded.

Hold/limit: A missing source or changed list requires reviewer disposition.



3. Confirm an inert training setup

The instructor establishes the permitted inert setup and supervised scope. This draft does not supply a real isolation procedure.

Evidence: The reviewer has accepted the training conditions.

Hold/limit: Do not apply this draft to energized equipment or an aircraft.



4. Review the support and access space

Identify AP-01, its left hinge and R1/R2 with the support bed.

Evidence: The intended model access and rail path are understood.

Hold/limit: Missing support or an obstructed sweep means HOLD.



5. Identify and release D1

On the reviewed model, operate the upper catch D1.

Evidence: D1 is visibly clear.

Hold/limit: Do not infer a safe release from an occluded view.



6. Identify and release D2

Operate lower catch D2 before AP-01.

Evidence: Both catches are visibly clear.

Hold/limit: An engaged catch blocks the panel step.



7. Open AP-01

Use the source left-hinge direction to reveal the bay.

Evidence: Panel-open reference state matches the named model.

Hold/limit: Do not force another hinge direction or claim physical clearance from this viewer.



8. Identify P1 and J1

Distinguish the moving bay plug from the unit-fixed receptacle.

Evidence: One plug and one receptacle are identified.

Hold/limit: Ambiguous identity or source detail means HOLD.



9. Review separation and harness parking

In a reviewed demonstration, separate the coupling and park the harness outside the rail path.

Evidence: Coupling and parked-harness evidence are available.

Hold/limit: A cable across the path blocks rail travel.



10. Review T1 and T2

Identify unit-mounted retainer cams and cabinet-fixed keepers.

Evidence: The model/source shows the intended clear retainer state.

Hold/limit: Unclear pivot, keeper contact or state requires review.



11. Inspect supported withdrawal

Use the withdrawn GLB to inspect rail alignment and continuous support.

Evidence: Both rails and the support bed remain part of the plan.

Hold/limit: A static GLB is not proof that a physical movement was completed.



12. Record the checkpoint

Record the named withdrawn state and any missing view before the configuration decision.

Evidence: A reviewer can trace source, state and unresolved gaps.

Hold/limit: The existing tray-transfer checkpoint is not a demonstrated continuous lateral lift.

